Inconel 600 UNS N06600 2.4816 Corrosion-Resisting Superalloy Bars and Plates
This nickel-chromium-based high-temperature corrosion-resistant alloy boasts excellent resistance to high-temperature oxidation, superior mechanical properties, and outstanding corrosion resistance. Even in high-temperature environments, it maintains high strength and exhibits exceptional resistance to chloride-induced stress corrosion cracking. Additionally, it demonstrates good tolerance to a variety of organic acids, alkaline solutions, and high-temperature steam environments.
Applications of Inconel 600
In chemical manufacturing, this alloy is commonly used to produce heater tubes, reaction vessels, evaporators, and acid-resistant equipment. In the nuclear energy sector, it is employed in critical components such as fuel element support structures and control rod guide tubes for nuclear reactors. In the aerospace industry, it is suitable for engine parts, combustion chamber liners, and exhaust systems.
Equivalent Grades and Commonly Used Specifications of Inconel 600
| Steel Grade | Specification | Specification Name |
| NS3102 /
1Cr15Ni75Fe8/ NS312 /NCr15-8 |
GB/T 15007 | Designations of corrosion-resisting alloy |
| GB/T 15008 | Corrosion-resistant alloy bars | |
| GB/T 2054 | Nickel and nickel alloy plate and sheet | |
| YB/T 5353 | Hot-rolled plates of corrosion-resisting alloys | |
| YB/T 5354 | Cold-rolled plates of corrosion-resisting alloys | |
| UNS N06600 / Inconel 600 | ASTM B166 | Standard Specification for Ni-Cr-Al Alloy, Ni-Cr-Fe Alloys, Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-W Alloy and Ni-Cr-Mo-Cu Alloy Rod, Bar, and Wire |
| ASTM B167 | Standard Specification for Nickel-Chromium-Iron Alloys Seamless Pipe and Tube | |
| ASTM B168 | Standard Specification for Ni-Cr-Fe Alloys, Ni-Cr-Co-Mo Alloy, and Ni-Fe-Cr-W Alloy Plate, Sheet, and Strip | |
| ASTM B564 | Standard Specification for Nickel-Chromium-Iron Alloy Forgings | |
| AMS 5540 | Nickel Alloy, Corrosion and Heat Resistant, Plate, Sheet, and Strip, Solution Treated | |
| AMS 5665 | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, Solution Treated | |
| NCF600 | JIS G 4901 | Corrosion-Resistant and Heat-Resistant Superalloy, Nickel and Nickel Alloy—Bars |
| JIS G 4902 | Corrosion-Resistant and Heat-Resistant Superalloy, Nickel and Nickel Alloy—Plate, Sheet and Strip | |
| 2.4816/
NiCr15Fe |
DIN 17742 | Wrought Nickel Alloys with Chromium-Chemical Composition |
| DIN 17750 | Wrought Nickel and Nickel Alloy Sheet, Plate and Strip | |
| DIN 17752 | Rods and Bars of Wrought Nickel and Nickel Alloys-Properties | |
| DIN EN 10095 | Heat Resisting Steels and Nickel Alloys | |
| Products produced as per other specifications or technical agreements (if need) are available. | ||
Typical Chemical Composition of Inconel 600
|
Elements |
C | Si | Mn | P | S | Ni | Cr | Cu |
Fe |
|
Mass Fraction % |
≤0.15 | ≤0.50 | ≤1.00 | ≤0.30 | ≤0.015 | ≥72.00 | 14.00~17.00 | ≤0.50 |
6.00~10.00 |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||||
Typical Heat Treatment Condition and Mechanical Properties of Inconel 600
|
Delivery Condition |
Mechanical Properties and Hardness of Heat-Treated Specimens | ||||||
| Rp0.2/(N/mm2) | Rm/(N/mm2) | A/% | Zb/% | Aku2d/J | HBW |
HRC |
|
|
Solution-treated Condition |
≥240 | ≥550 | ≥30 | / | / | / |
/ |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||
Product Forms and Size Range of Inconel 600
|
Product forms |
Size range |
|
Bars |
Diameter or side length: 5.0mm~1000mm |
| Flats |
thickness: 4.0mm~1000mm width: 300mm~2200mm |
| Produce as other form and size according to technical requirements are available. | |
