UNS N10675 Corrosion-Resisting Superalloy Bars and Plates
This high nickel-molybdenum austenitic corrosion-resistant alloy possesses outstanding resistance to strong reducing acids. With low impurity content and stable single-phase structure, it has superior hot & cold formability and weldability, good resistance to stress corrosion cracking in reducing media, ideal for pressure-bearing equipment under heavy reducing corrosion.
Applications of UNS N10675
Widely used in hydrochloric acid reactors, hydrometallurgical leaching tanks, complete pickling equipment, phosphoric acid concentration heat exchangers, hydrofluoric acid treatment units and strong-reducing corrosion reactors for organic synthesis, serving as a dedicated pressure-bearing alloy for service environments with high-concentration reducing acids.
Equivalent Grades and Commonly Used Specifications of UNS N10675
| Steel Grade | Specification | Specification Name |
| NS3203 | GB/T 15007 | Designations of corrosion-resistant alloy |
| UNS N10675 | ASTM B564 | Standard Specification for Nickel Alloy Forgings |
| ASTM B472 | Standard Specification for Nickel Alloy Billets and Bars for Reforging | |
| ASTM B335 | Standard Specification for Nickel-Molybdenum Alloy Rod | |
| ASTM B333 | Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip | |
| ASTM B619 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe | |
| ASTM B622 | Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube | |
| ASTM B366 | Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings | |
| ASTM B462 | Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive Service | |
| Products produced as per other specifications or technical agreements (if need) are available. | ||
Typical Chemical Composition of UNS N10675
|
Elements |
C | Cr | P | S | Si | Ni | Mn | Mo | Cu | Co | Fe | Al | V | Ni+Mo | Nb | Ta | Ti | W |
Zr |
|
Mass Fraction% |
≤0.010 | 1.00~3.00 | ≤0.030 | ≤0.010 | ≤0.10 | ≥65.00 | ≤3.00 | 27.00~32.0 | ≤0.20 | ≤3.00 | 1.00~3.00 | ≤0.50 | ≤0.20 | 94.00~98.00 | ≤0.20 | ≤0.20 | ≤0.20 | ≤3.00 |
≤0.10 |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||||||||||||||
Typical Heat Treatment Condition and Mechanical Properties of UNS N10675
|
Delivery Condition |
Mechanical Properties and Hardness of Heat-Treated Specimens | ||||||
| Rp0.2/(N/mm2) | Rm/(N/mm2) | A/% | Zb/% | Aku2d/J | HBR |
HRC |
|
|
Solution Annealed Condition |
≥350 | ≥760 | ≥40 | / | / | / |
/ |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||
Product Forms and Size Range of UNS N10675
|
Product forms |
Size range |
|
Bars |
Diameter or side length: 5.0mm~1000mm |
| Flats |
thickness: 4.0mm~1000mm width: 300mm~2200mm |
| Produce as other form and size according to technical requirements are available. | |
