Inconel 601 UNS N06601 2.4851 Corrosion-Resisting Superalloy Bars and Plates
A nickel-based solid-solution strengthened high-temperature alloy with excellent high-temperature stability and resistance to reducing acid corrosion. It exhibits good low-temperature toughness, can withstand oxidative environments, and enhances resistance to pitting and crevice corrosion. Additionally, it boasts excellent weldability and thermal stability, maintaining superior tensile and fatigue properties from low temperatures up to 980℃.
Applications of Inconel 601
In the aerospace industry, it can be used to manufacture turbine blades, combustion chambers, guide vanes, mounting flanges, and cylinders for aircraft engines; in the energy sector, it is widely employed in high-temperature equipment such as gas turbines and nuclear power plants; in the chemical industry, it is suitable for high-temperature and high-pressure components in chemical equipment, as well as for conveying highly corrosive media—such as organic acids, inorganic acids, and alkaline solutions—in the fine chemical and pharmaceutical industries.
Equivalent Grades and Commonly Used Specifications of Inconel 601
| Steel Grade | Specification | Specification Name |
| NS3103 /
1Cr23Ni60Fe13Al NS313 / H06601 |
YB/T 5353 | Hot-rolled plates of corrosion-resisting alloys |
| YB/T 5354 | Cold-rolled plates of corrosion-resisting alloys | |
| GB/T 15007 | Designations of corrosion-resisting alloy | |
| GB/T 15008 | Corrosion resistant alloy bars | |
| UNS N06601/
Inconel 601 |
ASTM B166 | Standard Specification for Ni-Cr-Al Alloy, Ni-Cr-Fe Alloys, Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-W Alloy and Ni-Cr-Mo-Cu Alloy Rod, Bar, and Wire |
| ASTM B564 | Standard Specification for Nickel Alloy Forgings | |
| ASTM B167 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube | |
| ASTM B168 | Standard Specification for Ni-Cr-Fe Alloys, Ni-Cr-Co-Mo Alloy and Ni-Fe-Cr-W Alloy Plate, Sheet, and Strip | |
| AMS 5715 | Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Vacuum Melted, Solution Treated | |
| AMS 5870 | Nickel Alloy, Corrosion- and Heat-Resistant, Plate, Sheet, and Strip, Vacuum Melted, Solution Treated | |
| NCF 601 | JIS G 4901 | Corrosion-Resistant and Heat-Resistant Superalloy, Nickel and Nickel Alloy—Bars |
| JIS G 4902 | Corrosion-Resistant and Heat-Resistant Superalloy, Nickel and Nickel Alloy—Plate, Sheet and Strip | |
| 2.4851/
NiCr23Fe |
DIN 17742 | Wrought Nickel Alloys with Chromium-Chemical Composition |
| DIN 17750 | Wrought Nickel and Nickel Alloy Sheet, Plate and Strip | |
| DIN 17752 | Rods and Bars of Wrought Nickel and Nickel Alloys-Properties | |
| DIN EN 10095 | Heat Resisting Steels and Nickel Alloys | |
| Products produced as per other specifications or technical agreements (if need) are available. | ||
Typical Chemical Composition of Inconel 601
|
Elements |
C | Si | Mn | P | S | Cr | Ni | Cu |
Al |
|
Mass Fraction % |
≤0.10 | ≤0.50 | ≤1.00 | ≤0.030 | ≤0.015 | 21.00~25.00 | 58.00~63.00 | ≤1.00 |
1.00~1.70 |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||||
Typical Heat Treatment Condition and Mechanical Properties of Inconel 601
|
Delivery Condition |
Mechanical Properties and Hardness of Heat-Treated Specimens | ||||||
| Rp0.2/(N/mm2) | Rm/(N/mm2) | A/% | Zb/% | Aku2d/J | HBW |
HRC |
|
|
Solution-treated Condition1100℃-1150℃ |
≥195 | ≥550 | ≥30 | / | / | / |
/ |
| Products produced as per other specifications or technical agreements (if need) are available. | |||||||
Product Forms and Size Range of Inconel 601
|
Product forms |
Size range |
|
Bars |
Diameter or side length: 5.0mm~1000mm |
| Flats |
thickness: 4.0mm~1000mm width: 300mm~2200mm |
| Produce as other form and size according to technical requirements are available. | |
